Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Charging process
4 - 6
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
4.2.2.3 Inserting the charger into the mains socket
• Insert mains plug (5) into 220 V plug socket.
4.2.2.4 Fitting the antenna
Fit the antenna back on the radio remote control again after the charging
process and secure with loctite.
Image 4-7 Inserting the mains plug
LED
Color Explanation
Continuous yellow light Standby (ready)
Flashing yellow Pre-charge
Rapid flashing green Main charge (rapid charge)
Flashing green Recharge (maintain)
Rapid flashing yellow Error
Continuous green light Ready
Flashing yellow and green Wait
HINWEIS
m
HINWEIS
m
HINWEIS
m
NOTICE
HINWEIS
Charge duration/operating duration.
Charge duration: 2 hours (depending on discharge con-
dition)