Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Safety
2 - 10
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
2.7 Organizational measures
2.7.1 Operating Instructions
The original operating instructions are a constituent part of the
LUDWIG HOOK. It must be retained and maintained during the entire
service life.
The owner and/or user is responsible for the original operating
instructions:
• being accessible for consultation at all times.
• is continuously availability at the site of use of the LUDWIG HOOK.
• will be forwarded to each subsequent owner.
2.7.2 Regulations
The generally-applicable legal and other binding regulations for
accident prevention and for environmental protection must be observed
and instructed alongside and supplementary to the operating
instructions!
Obligations of this type can apply, for example, to the making available/
wearing of personal protection equipment.
Supplementing the operating instructions with instructions including
supervision and reporting obligations for consideration of operational
specialties, e.g. with regard to work organization, working sequences,
personnel deployed.
The safety and danger awareness of the working personnel with consideration
of the operating instructions must be checked at least occasionally!
WARNING
m
Information requirements.
The personnel tasked with activities on the LUDWIG HOOK
must be made familiar with the safety-relevant parts of the
operating instructions and shall have understood the
content. This applies particularly to the personnel only
active on the LUDWIG HOOK occasionally.