Operating Instructions
Table Of Contents
- 1 Supply
- 2 Safety
- 3 Product
- 4 Charging process
- 5 Operation
- 6 Disposal and recycling
- 7 Maintenance/problem treatment
- 8 Technical data
- 9 Warranty
- 10 Standards/regulations
Safety
2 - 7
LUDWIG HOOK / 06/10/2020 / Ludwig System GmbH & Co KG; 83435 Bad Reichenhall, Germany / Tel.: +49 8651 7656730
2.4.2 Overload
2.4.2.1 LUDWIG HOOK
The LUDWIG HOOK must only be used for the lifting of loads within its
payload limit.
2.4.2.2 Breakage
m
DANGER
GEFAHR
Risk of hook breakage.
Serious injuries to death.
Avoidance:
• Observe the maximum permissible load.
There is a table for this purpose that shows
the max. payload according to the type of
slinging and the number of LUDWIG HOOKs
(see chapter 5 “Load types” on page 5 - 1).
m
DANGER
GEFAHR
Risk of rigging hardware breakage.
Serious injuries to death.
Avoidance:
• The rigging hardware (lifting straps, chains,
shackles, etc.) used in connection with the
LUDWIG HOOK must meet the requirements
of the lifting process and must be approved
for the particular application.