SDS

41-6620 WEATHERSCREEN EXTERIOR LATEX SATIN-WHITE
Product name
1
Product code
Date of issue
Version
00408071
7 June 2015
Exposure controls/personal protection
8 .
If workers are exposed to concentrations above the exposure limit, they must use
appropriate, certified respirators. Use a properly fitted, air-purifying or air-fed respirator
complying with an approved standard if a risk assessment indicates this is necessary.
Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator.
Safety glasses with side shields.
Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Personal protection
Eyes
Skin
Respiratory
:
:
:
butyl rubber
Gloves
:
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Environmental exposure
controls
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment will
be necessary to reduce emissions to acceptable levels.
Hands
:
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
>37.78°C (>100°F)
Liquid.
73% (v/v), 63.113% (w/w)
Not available.
Not available.
1.15
Not available.
Not available.
Soluble in the following materials: cold water.
Characteristic.
Not available.
Boiling/condensation point
Melting/freezing point
Not available.
Physical and chemical properties
Physical state
pH
Specific gravity
Vapor pressure
Vapor density
Volatility
Evaporation rate
Solubility
Odor
Color
:
:
:
:
:
:
:
:
:
:
:
:
Flash point
:
Closed cup: 113.33°C (236°F) [Product does not sustain combustion.]
Explosion limits
:
Upper: 0%
9 .
Partition coefficient: n-
octanol/water
:
Not available.
% Solid. (w/w)
:
36.887
Density ( lbs / gal )
:
9.6
Page: 4/7
Canada - Mexico