Use and Care Manual

10 | Product Information
Part 2. CARE & MAINTENANCE GUIDE
This is a comprehensive maintenance guide
for GlueCore ooring products from LUCIDA
SURFACES. Following this guide is mandatory
in order to validate your Exclusive Warranty
by LUCIDA SURFACES in both residential and
commercial applications. Contact LUCIDA
SURFACES regarding any questions or
concerns you may have.
BEFORE & AFTER INSTALLATION
LUCIDA SURFACES flooring products were
intelligently designed and manufactured to provide
robust and low maintenance ooring systems for
both residential and commercial applications.
Following this guide is mandatory to validate the
Exclusive Warranty and to guarantee a satisfactory
experience.
• Before and after installation, ensure that your
ooring remains within the specied suitable
environmental conditions outlined in the
installation guide for your product.
• For installations using adhesive wait 5 days
before using a wet mop to clean your oors to
allow the adhesive to fully bond to the sub oor
and ooring.
• Immediately after installation, use a damp cloth
to wipe up any excessive adhesive before it is
allowed to cure. Adhesive that has dried can
be removed using a plastic scraper; do not use
sharp or metallic scrapers.
• After installation, dry mop oor using a micro
ber mop pad or appropriate oor vacuum to
remove dust particulate from the oor.
Spray neutral pH cleaner onto the oor in
manageable area (spray mist will dry quickly).
Use a micro ber wet mop pad to mop the oor
with cleaner. If pad becomes dirty, be sure to
replace the pad with a new micro ber wet mop
pad. Work oor in sections.
• Make sure that the floors are adequately
protected during installation if other trades
are working within the environment. Damage
caused by workers within the installation area is