Installation Guide

10 | Product Information
Part 2. CARE & MAINTENANCE GUIDE
This is a comprehensive maintenance guide
for BaseCORE ooring products from LUCIDA
SURFACES. Following this guide is mandatory
to validate your Exclusive Warranty by LUCIDA
SURFACES for residential applications. Contact
LUCIDA SURFACES regarding any questions or
concerns you may have.
BEFORE & AFTER INSTALLATION
LUCIDA SURFACES ooring products were
intelligently designed and manufactured to
provide robust and low maintenance ooring
systems for both residential and commercial
applications. Following this guide is mandatory
to validate the Exclusive Warranty and to
guarantee a satisfactory experience.
• Before and after installation, ensure that your
ooring remains within the specied suitable
environmental conditions outlined in the
installation guide for your product.
• For installations of Peel and Stick wait 5 days
before using a wet mop to clean your oors
to allow the adhesive to fully bond to the sub
oor and ooring.
• Do not use any additional adhesive in
installation of product.
• Adhesive that has dried can be removed
using a plastic scraper; do not use sharp or
metallic scrapers.
• After installation, dry mop oor using a
microber mop pad or appropriate oor
vacuum to remove dust particulate from
the oor. Spray neutral pH cleaner onto the
oor in manageable area (spray mist will dry
quickly). Use a microber wet mop pad to
mop the oor with cleaner. If pad becomes
dirty, be sure to replace the pad with a
new microber wet mop pad. Work oor in
sections.
• Make sure that the oors are adequately
protected during installation if other trades
are working within the environment. Damage
caused by workers within the installation area