Owner's Manual

OWNER'S MANUAL
16
STEP 2
With the sync cable installed, use remote and test all functions of the
bed base. If remotes are not working, troubleshoot the problem by
following the instructions on page 18.
The two bases are now connected and ready for normal use.
TO PAIR ONE REMOTE TO TWO BASES:
STEP 1
Place two Twin XL or split size adjustable bases
next to each other in desired location. Ensure
both bases are in the at position. Plug the sync
cable into the SYNC input (shown to the left) on
each base's control box.
Synchronizing Two Bases (Twin XL Only)