ADVANCED ADJUSTABLE BASE info@lucidmattress.com 888-975-8243 SERIAL NO.
OWNER’S MANUAL ADVANCED ADJUSTABLE BASE
ADVANCED ADJUSTABLE BASE CONTENTS Safety & Warranty Warnings 04 Overview & Parts List 06 Assembly 08 Remote Control & Pairing 12 Synchronizing Two Bases 16 Emergency Power Down 17 Connecting with Bluetooth 17 Troubleshooting 18 Warranty 19
Safety & Warranty Warnings IMPORTANT: PLEASE READ ALL INFORMATION CAREFULLY BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS. WARRANTY WARNINGS SAFE OPERATION Do not open or tamper with control box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal workings of these components are tampered with. • Use caution when having liquids in or around the bed to ensure no spilling occurs.
WEIGHT LIMITS FCC COMPLIANCE • • Operates on 2.4 GHz frequency transmitter • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • To comply with FCC RF exposure requirements, no change to the antenna or the device is permitted.
Overview & Parts List GET TO KNOW YOUR ADJUSTABLE BASE Before beginning assembly of your adjustable base, please take a moment to familiarize yourself with the parts and location of components, as explained here. If any parts or components are missing, or are different than shown in the adjacent image, do not attempt to complete the assembly process and contact customer support by calling 888-975-8243 or emailing info@lucidmattress.com.
REMOTE MATTRESS RETAINER BAR POWER SUPPLY BOX & POWER CORD THREE ADJUSTABLE HEIGHT INCREMENTS 2", 3", 6" 6 legs for Twin XL and 7 for Full and Queen.
Assembly NOTES 1. 2. 3. Two people are required to assemble this adjustable base. Open the carton in a flat position, bottom facing up, to avoid damage. Cut all orange and white zip ties. Do not remove any of the black zip ties. STEP 1 Remove folded bed base from the box and carefully unfold the base. Set it mattress side down on the floor. i Take caution to avoid pinching fingers or any underside wires along the hinge.
STEP 3 Install legs by threading the bolt of each leg into the frame and tightening by hand. All Twin XL bases feature six legs while Full and Queen bases feature seven. STEP 4 Uncoil the input power cord (connected to the control box on the underside of the base) and plug it into the power supply box. STEP 5 Uncoil the power cord (that has a wall outlet connection) and attach it to the power supply box opposite of the cord attached in Step 4.
Assembly, continued STEP 6 With two to four people, lift the bed by the metal frame and turn it over so the mattress side is facing up. Take caution not to lift the bed with the fabric, or to use the legs as pivot points. This pressure may cause damage. Avoid dragging the base across the floor. STEP 7 Ensure three AAA batteries (included) are installed correctly in the remote. STEP 8 Slide the mattress retaining bar into the anchors located at the foot of the base.
STEP 9 Plug the power cord into the wall outlet and refer to pages 12-15 to test all the functionality of the remote. ADDITIONAL STEPS AND INFORMATION When using two separate Twin XL adjustable bases, prevent separation by wrapping a security strap around the center head and foot legs. Remove the adhesive backer from the anti skid pads and apply the anti skid pads on the frame. Place evenly on both sides of the frame.
Remote Control OVERVIEW All of the functions of the bed, explained here, can be operated with the remote control. This remote requires three AAA batteries (included) inserted in the back panel. PRESET BUTTONS PROGRAMMABLE BUTTONS Zero Gravity (ZG): Elevate the legs slightly higher than the chest, allowing blood to flow back to the heart to help reduce stress and fatigue. Personalize your experience by customizing the preset buttons to meet your preferences.
MASSAGE BUTTONS PRODUCT RATING Activate the massage motors by pressing the MASSAGE BACK or MASSAGE LEGS buttons. Increase the intensity of the massage by pressing the MASSAGE BACK or MASSAGE LEGS buttons up to seven times. Pressing the MASSAGE BACK or MASSAGE LEGS buttons an eighth time will turn the massage motors off. The head and foot motors are not designed to operate continuously for more than (2) minutes in an (18) minute time period.
Remote Control, continued PAIR (see page 15) ZERO-GRAVITY TV ANTI-SNORE READ SAVE MEMORY POSITION 1 MEMORY POSITION 2 CHILD LOCK HEAD AND FOOT UP HEAD UP FLAT HEAD DOWN MASSAGE BACK FOOT UP FOOT DOWN HEAD AND FOOT DOWN MASSAGE LEGS TIMER MASSAGE ON/OFF MASSAGE TYPE UNDERBED LIGHTS 14 OWNER'S MANUAL
Remote Control Pairing OVERVIEW The original remote that comes in the box is already paired to the base. No further action is required. In the event that the remote is not paired with the base (as in the case of a replacement remote), begin by checking the following: STEP 1 Ensure the remote batteries are functioning. Replace if necessary. Confirm the power cord is connected to a power source. STEP 2 On the control box (underside of base), press the PAIR button twice.
Synchronizing Two Bases (Twin XL Only) TO PAIR ONE REMOTE TO TWO BASES: STEP 1 Place two Twin XL or split size adjustable bases next to each other in desired location. Ensure both bases are in the flat position. Plug the sync cable into the SYNC input (shown to the left) on each base's control box. STEP 2 With the sync cable installed, use remote and test all functions of the bed base. If remotes are not working, troubleshoot the problem by following the instructions on page 18.
Emergency Power Down INSTALLING BATTERIES Batteries act as a backup power source in case of a power failure while the head and/ or foot sections are raised. Locate and remove the cover on the 9V battery compartment in the power supply unit. Install two alkaline 9V batteries (not included) and replace the cover. i Batteries are for single use only. After lowering the adjustable bed once during a power failure, replace with a new set of batteries.
Troubleshooting PROBLEM POSSIBLE SOLUTION No features of the base will activate. Ensure the remote is paired correctly with the base (see page 15). Unplug the power cord, wait 30 seconds and plug back in to reset electric components. The surge protection or the electrical outlet may be defective. Test the outlet by plugging in another working appliance. Head or foot section will elevate, but will not return to the flat position. Bed mechanism may be obstructed. Elevate bed and check for obstruction.
Warranty Information 10-YEAR LIMITED WARRANTY WHAT IS COVERED This warranty covers any defects in materials or workmanship under the conditions and exceptions stated below. HOW LONG COVERAGE LASTS This warranty runs for up to ten (10) years from the date of purchase, according to the tiers set forth below. shall bear all labor and shipping costs associated with repair or replacement of the defective part(s).
Notes To assist with warranty claims, please keep your receipt and record the following: DATE OF PURCHASE PLACE OF PURCHASE LOT # (found on ID Tag) PO # (found on shipping box label) SERIAL # (found on back cover of this manual) ADDITIONAL NOTES 20 OWNER'S MANUAL
22 OWNER'S MANUAL
ADVANCED ADJUSTABLE BASE 23
