Use and Care Manual
ADVANCED ADJUSTABLE BASE
13
Remote Control Pairing
OVERVIEW
The original remote that comes in the box is already paired to
the base. No further action is required.
In the event the remote is not paired with the base (as in the case
of a replacement remote), begin by checking the following:
STEP 2
On the control box of Base A, as shown on
the left, press the button twice. A green
LED light will illuminate.
STEP 3
Within 15 seconds of completing Step 2,
press and hold the and buttons
on Remote A until the green LED light on
the control box turns off. Test the remote
functions to ensure your remote is
properly paired.
STEP 1
Ensure the remote batteries are functioning. Replace if necessary.
Conrm the power cord is connected to a powered source.