Use and Care Manual

OWNER'S MANUAL10
STEP 7
With two to four people, lift the bed by the
metal frame and turn it over so the mattress
side is facing up. Take caution not to lift
the bed with the fabric, or to use the legs
as pivot points. This pressure may cause
damage. Avoid dragging the base across
the oor.
Assembly, continued
STEP 8
Ensure two AAA batteries (included) are
installed correctly in the remote.
STEP 6
To install the six legs, thread the bolt of the
leg into the frame and tighten by hand.
Attach the center legs rst, which attach
on top of the center connection brackets
attached from step 5. Then fasten the
remaining corner legs.