Use and Care Manual
100 SERIES ADJUSTABLE BASE
OWNER'S MANUAL
17
16
PROBLEM POSSIBLE SOLUTION
No features of the base will activate. Ensure that all wired connections are secured
bellow the bed base.
Unplug the power cord, wait 30 seconds and
plug back in to reset electric components.
The surge protection or the electrical outlet
may be defective. Test the outlet by plugging
in another working appliance.
Head or foot section will elevate, but will
not return to the at position.
Bed mechanism may be obstructed. Elevate
bed and check for obstruction. Remove
obstruction.
Head section may be too close to the wall.
The remote will not operate the base. Check to ensure that the remote control is
secured completely and that the power cord
is plugged into the wall outlet.
Troubleshooting