Use and Care Manual

100 SERIES ADJUSTABLE BASE
OWNER'S MANUAL
09
08
Assembly
Open the carton in the at
position, bottom facing
up, to avoid damage.
Two people are
required to assemble
this adjustable base.
2.1.
NOTES
STEP 3
To install the six (6) legs, thread the bolt of
the leg into the frame and tighten by hand.
STEP 2
Open the accessories box and ensure all
accessories are included (see pages 6-7).
STEP 1
Remove folded bed base from the box and
carefully unfold the base. Set it on its side
with the base half-way open.
STEP 4
Uncoil the input power cord (connected
to the control box on the underside of the
base) and plug it into the power supply box.
Take caution to avoid pinning ngers or
any underside wires along the hinge.
i
STEP 5
Connect the remote cord into the
receptacle cord on the underside of
the base.