8 Lucidi. View instructional videos online at www.lucidaudio.
1 Power switch - 0 N/OFF position 2 Volume dial - twist to adjust 3 Listening mode selction - push button to change modes 4 Microphone
Start Hearing Better 1 Install Batteries 2 Choose proper tips and fins 3 Power on 4 Wear and enjoy!
\ Listening Modes Standard - Default, amplifies low sounds and compresses loud noise best for quiet environments. Advanced - Adds Adaptive Noise reduction to standard mode for clearer conversation. I Telecoil - Use with telephone calls To change modes it is a simple press, the volume knob clicks and the mode is changed.
Choosing & Fitting Proper Tips & Fins Slide fins over the HearBuds housing. Install Lucid Fit Tips to the ear canal post on the HearBud. To get a comfortable fit, try different Lucid Fit Tip & Fin size combinations.
Inserting Batteries Your HearBuds use a #10 battery. Remove Lucid Fit Tips®and Fins from HearBud. Open the battery door. With the positive side up, insert the battery into the battery compartment. Place Lucid Fit Tips and Fins back on your HearBud. When battery power is low you will hear the low battery prompt.
Important Battery Information Zinc Air technology batteries are activated by exposure to air. Do not remove sticker on batttery until ready to use. Allow 1 minute after sticker is removed for full activation of Zinc Air batteries and maximum battery life.
We Are Here to Help! Call 800-775-7124 Email support@lucidaudio.com Online www.lucid audio.com ~ Lucidi. P.
