User's Manual

2 3
BRIGHTNESS CONTROL
Adjust brightness by gently tapping the + or – brightness control icons on the bottom of the
light. You can also press and hold, and the brightness will ramp in the direction associated
with the icon.
NOTE: FOR BEST RESULTS, LEAVE ALL LIGHTS ON IN THE BATHROOM WHEN USING
THE LUCERELIGHT.
INDICATOR LIGHTS
The two LucereLights have built-in radio communications, so that when you press the icons
on one light to change illumination, the other light will automatically correspond.
An indicator at the top of the light informs you of battery status:
Red (Blink) – battery low, charging required
Yellow – charging
Green – charging complete
POWER SAVER SWITCH
The power-saving ON/OFF slide switch is located on the back of the light. Fully charged,
LucereLight has power for continuous operation for one hour at maximum brightness.
In power-save mode the switch disables power consumption and all functions (except
charging) so that the unit can be stored or left unattended for a long period and cannot turn
on accidentally when packed in luggage or carried in a purse. This ensures the light is ready
with a full battery when you need it.
This switch also disables the internal radio transmitter so that it does not cause interference to
aircraft systems and meets all Federal Aviation rules.
NOTE: The light constantly uses a small amount of electricity to power the icon sensors and
radio receiver.
BEFORE ATTACHING
To ensure correct adhesion, make sure the mirror or glass is totally clean before attaching
the silicone base or permanent mount. Also, ensure the back surface of the silicone base
is clean. If any dust or lint is on it, rinse under warm water and shake dry or use a lint free
microber cloth.
WHAT’S IN THE BOX
LUCERE LIGHTS (2)
SILICONE BASES (2)
PLASTIC PLATES (2)
USB CHARGER
USB CHARGING CABLES (2)
DOUBLE-SIDED TAPE (4)
USER MANUAL
ONE-YEAR WARRANTY
OVERVIEW
Most mirrors do not have adequate lighting. By attaching LucereLight
™
to your mirror you
will have the best natural lighting when you need it, wherever you need it.
Lighting engineers and optical experts have designed LucereLight to illuminate your face
perfectly,. LucereLight can be placed at the height of your choosing and can be moved
easily for recharging and/or traveling. The light can be dimmed to nd the lighting level best
suited for you.
LucereLight is available in Icy Blue, Dusty Rose and Metallic Silver.
FEATURES
Note: The power-saving ON/OFF switch located at the back of the light should be turned
to the ON/GREEN position for the operation of LucereLight.
ON-OFF BUTTON
To turn the lights on or o press the LucereLight logo light icon on the bottom of the light
between the + and – icons. Pressing the + or – icons will also turn on the light.
plastic plateUSB cable & charger silicone basedouble-sided tape
LucereLight
™