Welcome to LucereLight™
WHAT’S IN THE BOX LUCERE LIGHTS (2) SILICONE BASES (2) PLASTIC PLATES (2) USB CHARGER USB CHARGING CABLES (2) DOUBLE-SIDED TAPE (4) USER MANUAL ONE-YEAR WARRANTY BRIGHTNESS CONTROL Adjust brightness by gently tapping the + or – brightness control icons on the bottom of the light. You can also press and hold, and the brightness will ramp in the direction associated with the icon. NOTE: FOR BEST RESULTS, LEAVE ALL LIGHTS ON IN THE BATHROOM WHEN USING THE LUCERELIGHT.
ATTACHING These are the simple steps to attaching LucereLight to your bathroom mirror. (Click on link xxxx to see instructional on youtube.com) 1. ATTACHING TWO LIGHTS (see illustration) For optimum effective lighting, LucereLight has been designed for use in pairs. Choose placement of the silicone bases and the lights vertically on the mirror on either side of your face to give maximum illumination.
RECHARGING Remove LucereLights from silicone bases for charging. The charging cords can make them fall from the silicone mounts. The mounts only support the lamps themselves. The charger supplied is for 110-240 volt input. Recharging takes between 1 and 2 hours. When the switch is in ON position the lithium ion battery will stay charged for 1 month. When switch is in OFF position the battery will stay charged for 6 months. SAFETY CAUTION: The light is not tolerant of immersion in water.
ISED REGULATORY STATEMENTS This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme avec ISED Canada applicables aux appareils radio exempts de licence.
