user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Overview
- Cajun P333T Front and Rear Panels
- Applications
- Installation and Setup
- Cajun Campus CLI (Command Line Interface)
- Conventions Used
- Establishing a Serial Connection for Configuration
- Establishing a Telnet Session
- Running the CLI
- Security Levels
- General Commands
- Navigation, Cursor Movement and Shortcuts
- Getting Help
- Command Syntax
- Commands, Parameters and Default Settings
- Specifications
- Cajun P330 Standalone Manager
- How to Contact Us
Chapter 4 Installation and Setup
Cajun P333T User’s Guide 19
Configuring the Switch
The Cajun P333T may be configured using the text-based “Command Line
Interface” (CLI) utility, the stand-alone Cajun P330 Manager or CajunView.
For instructions on the text-based utility, see the CLI chapter.
For instructions on installation of the graphical user interfaces, refer to the “Cajun
P330 Manager” appendix. For instructions on the use of the graphical user
interfaces, refer to the Manager User’s Guide on the Management CD.
Cajun P330 Default Settings
The default settings for the Cajun P330 switch and its ports are determined by the
Cajun P330 software. These default settings are subject to change in newer versions
of the Cajun P330 software. See the Release Notes for the most up-to-date settings.
Switch Settings
Table 4.1 Default Switch Settings
Function Default Setting
Cajun P330 IP Address 149.49.32.134
Default Gateway 0.0.0.0
VLANs VLAN 1
Spanning Tree Enabled