User manual

DEFINITY Enterprise Communications Server Release 6

Maintenance for R6vs/si

555-230-127

Issue 1

August 1997

Maintenance Object Repair Procedures

Page 10-193BRI-SET, ASAI-ADJ, BRI-DAT

For all endpoint types, a signaling link becomes "unbound" when it is

disconnected at Layer 2. For BRI endpoints supporting MIM initialization, a

signaling link may also become "unbound" if a subsequent attempt to perform

SPID initialization on a "bound" link fails, (that is, wrong SPID is entered into the

endpoint by the user).

Table 10-69. TEST #626 Signaling Link Status Test

Error

Code

Test

Result Description/ Recommendation

1139 ABORT The Packet Bus in the port network is out-of-service.

1. Follow the repair procedures for the Packet Bus.

2. After completing Step 1, execute the test port long PCSSpp

command, and review the results of the BRI Port Local LAN Loop

Around Test to verify the repair.

1141 ABORT The PKT-CTRL is out-of-service.

1. Refer to PKT-CTRL (Packet Control Circuit Pack) Maintenance

documentation.

2. If Step 1 does not resolve the problem, escalate to the next tier.

1144 ABORT The PPN Packet Bus is out-of-service.

1. Follow the repair procedures for the Packet Bus in the PPN.

2. After completing Step 1, execute the test port long PCSSpp

command, and review the results of the BRI Port Local LAN Loop

Around Test to verify the repair.

Continued on next page