User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-334test data-module
8
Defaults
The default cabinet is cabinet 1. The default carrier is carrier “a,” except for SPE
duplex system PPNs. In this case the carrier has no default and either “a” or “b”
must be entered. The default for the remaining parameter is a repeat of 1.
Output
The following example shows the output from the test customer-alarm 02a
command.
Field Definitions
test data-module
This command performs hardware diagnostic tests on a data module or data
channel. Test results are determined by the interface to the digital switch-data
line port, digital line port, or network control data channel.
Port The port address (cabinet-carrier-slot)
Maintenance
Name
The maintenance name (always CUST-ALM)
Alt. Name Not applicable
Test No. The test number (always 115)
Result Test result: Pass, Abort, or Fail
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
test customer-alarm 02A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A CUST-ALM 115 PASS
Command Successfully Completed