User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-276status hardware-group
8
Output
The following output example is a display of the status hardware-group
command.
Field descriptions
Hardware Group Command
State:
“active” = testing in progress, “canceled” = testing canceled,
“complete” = command completed; no testing occurring.
Number of MOs Tested:
Number of MOs in the specified group (refer to test
hardware-group command) that the hardware-group command
tests, including MOs that were tested or aborted due to resource
contention.
Total Number of MOs to be
Tested:
Number of MOs in the group specified in the test
hardware-group command.
Percent Complete:
Ratio of the completed MOs to the MOs to test in the command.
Elapsed Test Time:
It tracks completion time for the hardware-group command. If a
test cancels, then restarts, the time for the cancel period is
excluded. The time displays in HH:MM:SS format.
Repetition Number
Number of completed iterations that correspond to the ’repeat’ or
’continuously’ option.
Percentage of Tests
Passed:
Percentage of tests that passed.
Percentage of Tests
Failed:
Percentage of tests that failed.
status hardware-group page 1 of 1
HARDWARE GROUP STATUS
Hardware Group Command State: active
Number of MOs Tested: 11070
Total Number of MOs to be Tested: 12300
Percent Complete: 90%
Elapsed Test Time (hr:min:sec): 0:15:30
Repetition Number: 1
Percentage of Tests Passed: 82%
Percentage of Tests Failed: 11%
Percentage of Tests Aborted: 7%
ENTERED HARDWARE GROUP COMMAND
Command: test hardware-group system
Test sequence: short
Test repetition: repeat 3
Output Options: failures
Hardware Options: SPE-interchange