User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-235status card-mem
8
Field descriptions
Field descriptions
Location
Physical location (carrier) of the memory card.Simplex system = 01A for
carrier A of Processor Port Network. High or Critical Reliability Systems
= 01A or 01B.
System Size
System configuration (Small or Medium). This information catches
errors such as incorrectly-sized memory card inserted into the system.
Capacity
Inserted memory card capacity and the series number of the memory
card. (a 3-digit format for the memory card size and a 1-digit format for
the series number). Three memory card capacities are used in the
DEFINITY D92 system. Memory card file contents are described below.
Capacity of Memory Card
Card
Size User Customer File Names
1 Mb Small w/o Announcements translation
4 Mb Medium w/o Announcements translation
4 Mb Small and Medium with
Announcements
translation
announcements
10 Mb Maintenance (core dump) translation
announcements core_
dump
10 Mb System Upgrade system_software
Status
“inserted” = valid memory card is in the memory card slot. When the
status is “inserted,” the switch can perform I/O operation to the
memory card
“no card” = no memory card is inserted or the inserted memory card
has a bad connection
“unformatted”= the inserted memory card is unformatted or the
switch cannot recognized it.
Write-Protection
“on” = the write-protection toggle on the memory card is on. “off” =
the write-protection toggle on the memory card is off. If the
“Write-Protection” field is “on,” the switch cannot store files to the
memory card.
Number of Erase
Pulses
Number of pulses counted in the last erase operation on a Series 1
memory card. This field is blank for Series 2 memory cards due to
different algorithm of erase operations between the two series.