User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-201save translation
8
Output
The following output example is a display of save announcements command on
a simplex SPE system.
Field descriptions
save translation
This command allows users to save to tape or memory card the in-memory
translation data. This command runs as part of scheduled maintenance and/or
on demand by the technician. All translation data in memory during system
operation is volatile, meaning that if the switch goes down, the system loses all
data.
Simplex
The system defaults to save translation to the tape/memory-card on SPE_A.
Duplex
The system defaults to save translation to the tape/memory-card on both SPE-A
and SPE-B.
Processor
Displays processors when announcement data writes
to its devices. (SPE-A and SPE-B)
Command Completion Status
This field specifies if the command succeeded.
Error Code
Successful save = 0. Failed save = 2.
save announcements Page 1 of 1 SPE A
SAVE ANNOUNCEMENTS
Processor Command Completion Status Error Code
SPE-A Success 0