User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-170refresh spe-standby
8
Field descriptions
refresh spe-standby
This command immediately places Standby SPEs into Standby Mode. This
command preempts in-progress Standby SPE maintenance activity, resets the
Standby SPE Processor, and refreshes the Standby SPE’s DRAM memory (that
is, all of Active SPE DRAM memory is shadowed to the Standby SPE memory).
Refresh reactivates memory shadowing that is disabled while standby SPE is in
maintenance mode When Standby SPEs return to Standby Mode, their memory
up-date with Active SPE memory.
Because it preempts Standby SPE maintenance activities, the refresh
spe-standby command should be used judiciously. The following potential
side-effects can occur:
■ Tests that detect faults and/or lack of faults on Standby SPE components
might not run. Accordingly, alarms are not raised or retired.
■ Translation saves might not execute so translations data on Active and
Standby SPE mass storage devices do not reflect the changes made
since the last translation save.
release access-endpoint
This command removes all ports associated with the specified access endpoint
from a maintenance busy state. Periodic and scheduled tests subsequently
resume on the released ports. Maintenance completes background initialization
testing on the released ports. For details of the test sequence, refer to [3].
Port
Port address (cabinet-carrier) for tested maintenance objects. This
field displays cabinet and carrier values.
Maintenance
Name
CARR-POW.
Alt. Name
Not applicable.
Test Number
T126.
Test Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
refresh
spe-standby
init
inads
craft
none Standby SPEs must be
in maintenance mode
before the refresh
command can be
invoked.