User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-148list testcalls
8
list testcalls summary grp 78 to-grp 80 count 3
list testcalls summary to-grp 78
list testcalls summary to-grp 78 count 7 schedule
Output
The following example is of the output for the list testcalls detail grp 80
command.
Detail report field descriptions
Group
The trunk group number selected.
Type
The trunk group type.
Vendor
The vendor of this trunk group.
TTL Type
The kind of test line for this trunk group.
Threshold Values
The list of marginal and unacceptable threshold values defined
on the trunk group form.
The following fields appear on the lower section of the form. Many
of the column headings contain the abbreviations "FE" for far end
and "NE" for near end. These abbreviations define which end took
the measurements.
Trk Mem
The trunk member within the trunk group.
list testcalls detail grp 80 Page 1 SPE A
ATMS MEASUREMENT REPORT
Group: 80 Type: co Vendor: TTL Type: 105-w-rl
THRESHOLD VALUES Loss dev at
1004Hz-loss 404Hz 2804Hz C-msg C-ntch SRL SRL
Min Max - + - + Noise Noise LO HI ERL
Marginal -2 21 9 9 9 9 55 74 0 0 0
Unacceptable -2 21 9 9 9 9 55 74 0 0 0
Trk Test Test Test -16dBm 0dBm
Mem Date Time Rslt NE FE NE FE NE FE NE FE NE FE NE FE NE FE NE FE NE FE
1
2
3
4
5
6
7
8
9
press CANCEL to quit -- press NEXT PAGE to continue