User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-12busyout packet-control
8
Feature Interactions
■ In a duplicated system, the packet-control busyout of standby process
complex is not allowed.
■ When the packet-control in the active control complex is busied out, all
connectivity across the Packet Bus is severed. Thus, all ISDN-BRI
point-to-point signaling links that have been established through the
active packet-control are torn down by the busyout packet-control
command. The release packet-control command re-establishes all
Packet Bus connectivity.
Output
The following example shows the output from the busyout packet-control 1A
command. The responses display on a test-by-test basis with one line of data for
each test result.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout
packet-control
location Location applies to
duplicated
configurations only.
Location represents a
carrier that contains
packet-control in the
system. Valid locations
= 1A or 1B.
Examples
busyout
packet-control 1A
busyout
packet-control 1B
init
inads
craft
simplex systems
(optional) = cabinet
1, carrier A
duplex systems =
cabinet 1, carrier of
choice.
See below
busyout packet-control 1A SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
1A PKT-CTRL PASS
Command successfully completed