User manual

DEFINITY Enterprise Communications Server Release 6

Maintenance for R6vs/si

555-230-127

Issue 1

August 1997

Error Messages

Page A-78set signaling-group

set signaling-group

Help Messages

If the system technician presses HELP after entering "set signaling-group," the following is

displayed:

Enter group identifier

Error Messages

If the specified group identifier is non numeric or out of range, the following message is

displayed:

Signaling group invalid

If the specified group identifier is not administered, the following message is displayed:

No signaling group assigned

If during the execution of a command a resource problem occurs that requires the user

to restart the command, then the following message is displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the following

message is displayed:

All maintenance resources busy; try again later

set synchronization

Help Messages

If the system technician presses HELP after entering "set synchronization," the following

message will be displayed:

Enter DS1 board location or Tone-Clock location:

[(cabinet (1-3)]; carrier (A-E))

Error Messages

If the command entered is in conflict with another currently executing command, then a

message will be displayed showing the login id of the conflicting user and the conflicting

command. The message is as follows:

’login id’:’command’ has a command conflict