User manual

DEFINITY Enterprise Communications Server Release 6

Maintenance for R6vs/si

555-230-127

Issue 1

August 1997

Error Messages

Page A-66reset board

Format invalid

If the range of the trunk group is incorrect, the following error message will be displayed:

Trunk or trunk group invalid

If the specified trunk group is not administered or has no members, the following

message will be displayed:

Group not assigned,

or group assigned but with no member

If the specified member is not administered, the following message will be displayed:

Group member not assigned

If the specified trunk group is part of the SCI link, the following message will be

displayed:

Cannot busyout/release part of SCI link

If the command entered is in conflict with another currently executing command, then a

message will be displayed showing the login id of the conflicting user and the conflicting

command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires the user

to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the following

message will be displayed:

All maintenance resources busy; try again later

reset board

Help Messages

If the system technician presses HELP after entering "reset board," the following message

will be displayed:

Enter board location, [’repeat’ (1-100)]