User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-25disable synchronization-switch
A
disable synchronization-switch
Help Messages
If the system technician presses help after entering "disable synchronization" the
following message will be displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear,and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
disable test-number
Help Messages
If the system technician presses HELP after entering "disable test-number," the following
message will be displayed:
Enter test number
Error Messages
If the test-number entered is not a valid system test number, the following error message
will be displayed:
Test number invalid
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed: