User manual

DEFINITY Enterprise Communications Server Release 6

Maintenance for R6vs/si

555-230-127

Issue 1

August 1997

Error Messages

Page A-21clear mst

If all of the available maintenance resources are currently in use, then the following

message is displayed:

All maintenance resources busy; try again later

clear mst

Help Messages

If HELP is pressed after entering "clear mst," the following message is displayed:

Entry is not required

Error Messages

If the command entered is in conflict with another currently executing command, then a

message is displayed showing the login id of the conflicting user and the conflicting

command. A conflict could occur if another user was executing an enable, disable or

clear message sequence trace command at the same time. The message is as follows:

’login id’:’command’ has a command conflict

clear pkt

Help Messages

If the technician presses HELP after entering "clear pkt," this message displays:

Enter port-network; port network number (1-3)

Error Messages

If the packet bus is not administered, this message displays:

Packet Bus is not activated, check system-parameters maintenance form

If all available maintenance resources are in use, this message displays:

All maintenance resources busy; try again later