User manual

DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-15busyout trunk
A
busyout trunk
Help Messages
If the system technician presses HELP after entering "busyout trunk," the following
message will be displayed:
Enter assigned trunk group number [or group/member]
Error Messages
If the format of the identifier is invalid, the following message will be displayed:
Format invalid
If the range of the trunk group is incorrect, the following error message will be displayed:
Trunk or trunk group invalid
If the specified trunk group is not administered or has no members, the following
message will be displayed:
Group not assigned, or group assigned but with no member
If the specified member is not administered, the following message will be displayed:
Group member not assigned
If the specified trunk group is part of the SCI link, the following message will be
displayed:
Cannot busyout/release part of SCI link
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later