User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-27ADX8D-PT (AUDIX Digital Port)

7 FAIL Conference Test failed on the primary channel. Some users may not notice a

disruption in service. In extreme cases, the conferencing feature may not work

at all.

14 FAIL The primary voice channel is not transmitting properly. User impact may range

from no noticeable effect to loss of use of this port.

15 FAIL The control channel between the processor and DEFINITY AUDIX circuit pack

is not transmitting properly. User impact may range from no noticeable effect to

loss of use of this port. This failure could also be disruptive to other users.

16 FAIL The secondary voice channel is not transmitting properly. User impact may

range from no noticeable effect to loss of use of this port.

None FAIL The test failed for reasons external to the DEFINITY AUDIX circuit pack.

1. Run circuit pack tests to check the Tone Generator circuit pack and the

Tone Detector circuit pack by using the test board PCSS s command.

2. Resolve any problems that are detected on the Tone Generator circuit

pack or Tone Detector circuit pack.

3. If the Tone Generator and Tone Detector circuit packs are functioning

properly, and if the test still fails, replace the AUDIX circuit pack (see

precaution at the beginning of this section).

PASS Voice and Control Channel Local Loop test passed. All channels are

transmitting properly.

1. To be sure that this is not an intermittent problem, repeat this test up to 10

times and see if it continues to pass.

2. If complaints still exist, examine the connections.

Table 10-11. TEST #13 Voice and Control Channel Local Loop Test — Continued

Error

Code

Test

Result Description/Recommendation

Continued on next page