User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-684upgrade software
8
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
For the following output example, the command that was entered was "test
tsc-administered 1/1".
Feature Interactions
Additional data is available after running the test. See the status tsc-administered
command for details on how to access the additional data.
upgrade software
This command allows the software text image, the flash component of the LMM
firmware, the MTP firmware, the Packet Control (PACCON) and the Processor
Interface (PI) firmwares to be upgraded. Save translation must be done before
this command.
Port The port address of the administered temporary signaling
connection that is being tested (signaling group no/tsc index).
Maintenance Name The type of maintenance object that is being tested.
Alt. Name Not applicable.
Test No The actual test that is being executed.
Result The result of the individual test -"PASS," "ABORT," "FAIL," "NO
BOARD," "DISABLED," "EXTRA BD."
Error Code A system-generated number that tells why the test failed or
aborted. A detailed list of the codes according to "Test No." is
provided for each MO (for example, see MO section "TSC-ADM
(Administered Temporary Signaling Connections)").
test tsc-administered 1/1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
1/1 TSC-ADM 604 PASS
Command Successfully Completed