User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids

Page 8-673test tdm

If the port network on which the desired TDM bus resides is unavailable, the

following message will be displayed:

EPN is not available

If the command entered is in conflict with another currently executing command,

then a message will be displayed showing the login id of the conflicting user and

the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires

the user to restart the command, then the following message will be displayed:

Command resources busy; Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the

following message will be displayed:

All maintenance resources busy; try again later

Output

The responses will be displayed on a test-by-test basis with one line of data

displayed for each test result.

Port For TDM-BUS maintenance object the port network number and

the bus (A or B) is displayed.

Maintenance Name The maintenance object being tested is TDM-BUS.

Alt. Name Not applicable.

Test No The actual test that is being executed.

Result The result of the individual test -"PASS," "ABORT," "FAIL," "NO

BOARD," "DISABLED," "EXTRA BD."

Error Code A system-generated number that tells why the release failed or

aborted. A detailed list of the codes according to "Test No." is

provided for each MO.