User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-620test memory
8
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
For the following output example, assume that the command that was entered
was "test memory 1b".
Feature Interactions
None.
Port The port address (cabinet-carrier) of the maintenance object that
is being tested.
Maintenance Name The type of maintenance object that is being tested will be
MEMORY.
Alt. Name Not applicable.
Test No. The actual test that is being executed.
Result The result of the individual test -"PASS," "ABORT," "FAIL".
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes according to "Test No." is
provided for each MO.
test memory 1b
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01B MEM-BD 87 PASS
01B MEM-BD 631 PASS
Command Successfully Completed