User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-498status signaling-group
8
Feature Interactions
None.
status signaling-group
status signaling-group - This command displays the operational status of the
specified ISDN-PRI signaling group.
Synopsis
status signaling-group group identifier print
Permissions
The following default logins may execute this command: system technician,
inads, cust, init, browse.
Examples
status signaling-group 1
status signaling-group 2 print
Description
The status signaling-group command displays the state, type, port location, and
state of the Primary and Secondary D-channels within the group.
A signaling group is a collection of B-channels signaled for by a designated
single D-channel or set of D-channels over an ISDN-PRI.
status processor-channels 1
PROCESSOR CHANNEL STATUS
Channel Number: 1
Channel Status: 6: In data transfer state
Reset Count: 3
Message Buffer Number: 1
Link Number: 4
Retransmission Count: 5