User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-478status logins
8
Feature Interactions
None.
status logins
This command will list the status all of the users that are currently logged into the
system.
Synopsis
status logins print
Permissions
The following default logins may execute this command: system technician,
inads, init, rcust, bcms, browse, cust.
Examples
status logins
status logins print
status link 1
PI LINK STATUS
Link Number: 1 Destination: TDMODULE Port: 1C0303
Link Status: in-service Dest Status: in-service/active Ext: 4002
ERROR COUNTERS
Hardware Device Check (receive): 0 Level 2 I-frames retransmitted: 0
Hardware Device Check (transmit): 0 Level 2 Reset (SABM): 3
Far-End MOOS Count: 0 Invalid Frame Count: 0
Far-End FRMR: 0 Far-End SABM(E)/DM: 0
Far-End DISC: 0 Protocol Error Detected: 0
Timeout: 0 Local Busy Out: 0
oftware Initiated Link Down: 0 Firmware Initiated Link Down: 0
LOCAL/REMOTE PROCESSOR CHANNELS
1/