User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-427status conference
8
In Use Is the endpoint currently participating in the conference or in process
of connecting to the conference? - y, c, e, f, n, blank.
y means that the endpoint is in use and is fully connected on all
media in an active conference.
c means that the endpoint is in use and is fully connected, however
the endpoint has changed the conference audio or video capability
or has changed the rate of the conference because of rate
adaptation. This condition requires analysis of this endpoint’s
capabilities and mode fields to identify which capability was reduced.
e means that the endpoint is in use but the endpoint had capability
problems. The endpoint does not have one of the required
capabilities (Vid, Bhl, MLP) to be a full participant. For MLP
capabilities, see the “T120” field. This condition requires analysis of
this endpoint’s capabilities and mode field to identify the missing
capability.
f means that the endpoint is in use but is not connected to all media.
This indicates that the endpoint has declared all the required
capabilities (channel/video/ audio/data) but is not fully connected to
all conference media at this time. This endpoint may be in the
process of connecting, has failed to connect, or is not a valid video
source. This condition requires analysis of this endpoint’s capabilities
and mode fields to identify the problem.
n means that the endpoint was connected in a conference but
has/was disconnected or attempted to connect to a conference but
was unsuccessful.
blank means the field is blank until the first call is made from/to the
endpoint.
Enh BAS EnhancedBasic Service Flag - n, y
y means that the endpoint supports the enhanced BAS
commands/caps;
n means that the endpoint only supports the basic BAS
commands/caps.
Chl Data on the quantify and quality of channels (transfer rate)? - y, e, n,
blank
y the endpoint has the required number of channels.
e means that the endpoint has not declared support for the correct
number of channels and cannot participate fully in the conference.
n means that the endpoint has declared the correct number of
channels, but all the channels have not yet joined the conference,
due to either a network or endpoint problem.
blank Audio add-on endpoints always have the Chl field set to
blank.