User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-401status bri-port
8
Feature Interactions
None.
BRI Signaling was suspended.
System timeouts in 60 seconds
and attempts to place the link in
service again. If a link remains in
this state while there is no
activity at the BRI endpoint:
1. Be sure SPID administration
on the switch and endpoints
are consistent. Verify the
repair by executing the
status bri-port PCSSpp
command. Determine that
the L2 state of the signaling
link is L3-Established.
2. Replace the endpoint. Verify
the repair by executing the
status bri-port PCSSpp
command. Determine that
the L2 state of the signaling
link is L3-Established.
ASAI 0-126 L3-Restarting ext The switch has sent a Restart
message to the adjunct but has
not yet received a Restart
Acknowledgment message
from the adjunct.
ASAI 0-126 L3-Restarted ext After receiving a Restart
Acknowledgment message, the
switch has sent a Heartbeat
message to the adjunct and is
waiting for a response.
ASAI 0-126 L3-Establishe
d
ext Normal state for ASAI adjunct.
Table 8-3. Status BRI-Port Command Interpretation — Continued
Endpoint
Types
TEI
Range Layer 2 State
Voice
Extension
Service
SPID Description / Recommendation
Continued on next page