User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-285release link
8
Link not administered or not enabled
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message is displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message is displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"release link 1."
Feature Interactions
None.
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out or released. With this command
the Port address represents the link-id.
Maintenance Name The type of maintenance object that is being released.
Alt. Name Not applicable.
Result "PASS," "ABORT," "FAIL."
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be found in the
"Busyout/Release Commands" section of this chapter.
release link 1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0301 PI-LINK PASS
Command successfully completed