User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-224list mst
8
Application Control
0xA2 - X.25 application error or notification
NOTE:
The ’X.25 application error message’ category contains notifications as well
as errors.
0xA2, 0xF0 and 0xF2 messages will be turned on by responding ’y’ to the
’Application Errors?’ field.
Version 1:
Version 2:
Errors/Notifications:
R1/R3:
0x01 - no outgoing buffer available
0x05 - pvc session down
0x06 - pvc session up
0x07 - pvc session connect
0x08 - pvc session restart
0x09 - message buffer overload uplink
0x0A - message buffer overload downlink
0x0B - message buffer exhaustion
0x0C - max # of outgoing msgs allowed
0x0D - bad msg type in message buffer routine
0x0E - no message buffers available
0x0F - message buffer pointer error
0x10 - pm state table stimulus ignored
0x11 - bad session connect message
Session Layer Control
NOTE:
The session layer header is considered part of the session layer message.
Message[1] = processor channel number
Message[2] = application error/notification
Message[1] = processor channel number
Message[2] = application error/notification
Message[3+] = pm stimulus ignored (For message[2] == 0x10 only)