User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-126display initcauses
8
The following example shows a typical vector event report.
display initcauses
This command records and displays a history of restarts performed by the
system.
Synopsis
display initcauses [ print | schedule ]
Permissions
The following default logins may execute this command: system technician,
inads, init, nms.
Examples
display initcauses
display initcauses print
display initcauses schedule
Description
The display initcauses command displays a history of recovery steps taken by
the system.
This command displays information for restarts of the active
processor only
. Each time the system performs some type of recovery (due to
user request or a hardware or software problem), the recovery information is
stored. The software error log also contains information pertaining to restarts. If a
reset 4 (reboot) occurs, the software error log will also be stored on tape.
Information in the software error log should be used in conjunction with
information in the initcauses log.
display events Page 1 SPE B
EVENTS REPORT
Event Event Event Event First Last Evnt
Type Description Data 1 Data 2 Occur Occur Cnt
50020 Call not queued 256/5 B 09/28/13:43 09/28/13:43 1
50541 Not a messaging split Split 89 4C 09/28/13:43 09/28/13:43 1