User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-72clear audits
8
clear audits
This command is used to clear the cumulative and/or peak hour’s data that has
been collected about the status of each data relation audit.
Synopsis
clear audits [cumulative | peak-hour]
Permissions
The following default logins may execute this command: inads, init.
Examples
clear audits cumulative
clear audits peak-hour
change system-parameters maintenance Page 3 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
Modem Connection: external
Data Bits: 8
Parity: none
Modem Name: intel
RTS/CTS Enabled: \Q3 Auto Answer Ring Count (rings): S0=10
Asynchronous Data Mode: &M0&Q0 Dial Type: T
DTE Auto-Data Speed: \J1 Adjustable Make/Break Ratio: &P0
Disable Data Compression: H0%C0 Dial Command: D
Enable Error Control: \N3 No Answer Time-out: S7=255
Misc. Init. Param: ____________________
Help/Error Message Line
Command Line