User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-69change system-parameters maintenance
8
Auto-Answer Ring
Count
This field controls the number of rings required before the
modem will automatically answer an incoming call. This field is 6
characters long with “S0=10” as the default. Typically, the maxi-
mum permissible value for this register is 255. The values 1-255
denote the number of incoming ring cycles.
This field is case in-sensitive; however, the default will be in
upper case. (S0=10)
Dial Type This field controls the type of inter-register signaling to be used
between the modem and the Central Office. The field name is
“Dial Type: ” with a default of ”T “ for tone dialing. Pulse dialing
is indicated by “P”. The field length should be 3 characters long.
This field will be concatenated with the dial string. This field will
be case in-sensitive; however, the default will be in upper case.
(T)