User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-42busyout tdm
8
If the port network on which the desired TDM bus resides is unavailable, the
following message will be displayed:
EPN is not available
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"busyout tdm port-network 1 bus a."
Port The port address is displayed as PN followed by the port network
number and bus (A or B) associated with the TDM bus.
Alt. Name Not applicable.
Maintenance Name The type of maintenance object that is being busied out. In this
case it is always TDM-BUS.
Result The result of the busyout -"PASS," "ABORT," "FAIL".
Error Code A system-generated number that tells why the busyout failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Error Codes" section of this chapter.
busyout tdm port-network 1 bus a SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PN 01A TDM-BUS PASS
Command successfully completed