User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-1627UDS1-BD (UDS1 Interface Circuit Pack)

The

list measurements ds1 summary

command displays the number of bit errors

detected (

Loopback/Span Test Bit-Error Count

field). Injecting this single bit error

should increment the bit error count of the loopback/span test by one.

Table 10-475. TEST #1215 Inject Single Bit Error Test

Error

Code

Test

Result Description/ Recommendation

ABORT Internal System Error

1. Retry the

test ds1-loop PCSS inject-single-bit-error

command at 1-minute intervals a maximum of 5

times.

2. If the test continues to abort, escalate the problem.

1015 ABORT Ports on the UDS1 Interface circuit pack have not been

busied out to out-of-service.

1. Enter the busyout board PCSS command to put all

trunks or ports of the UDS1 Interface circuit pack

into the out-of-service state.

2. Retry the command.

3. If the test continues to abort, escalate the problem.

Continued on next page