User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-1546UDS1-BD (UDS1 Interface Circuit Pack)

Table 10-457. TEST #52 Control Channel Loop Around Test

Error

Code

Test

Result Description/ Recommendation

None

2100

ABORT System resources required for this test are not available.

1. Retry the command at 1-minute intervals a maximum

of 5 times.

2. If the test continues to abort, escalate the problem.

FAIL The circuit pack failed to return the circuit pack code or

vintage.

1. Retry the command a maximum of 5 times.

2. If the problem continues, and if the circuit pack is

one of the Port circuit packs, replace the circuit

pack. Otherwise, if the circuit pack is part of the

SPE, use the procedure described in ‘‘

Replacing

Defective SPE Circuit Packs’’ in Chapter 6,

‘‘Reliability Systems: A Maintenance Aid’’.

3. Retry the command a few times a maximum of 5

times.

4. If the test continues to fail, escalate the problem.

PASS Communication with this circuit pack is successful.

Continued on next page