User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1451TIE-TRK (Tie Trunk)
10
testing configuration allows for the connection of Tie Trunks back-to-back in the
same switch to verify the operation of Tie Trunk ports. The tests can be
performed in either the E&M or simplex modes. For details, refer to the "Analog
Tie Trunk Back-to-Back Testing" section in Chapter 5, ‘‘
Routine Maintenance
Procedures’’
Hardware Error Log Entries and Test to Clear
Values
Table 10-441. TIE Trunk Error Log Entries
Error
Type Aux Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
0 Any Any Any test port PCSSpp s r 1
1 (a)
2
16384
2
None
2
WARNING
2
OFF
2
1 (b)
2
57476
2
None
2
WARNING
2
OFF
2
1 (c)
2
57477
2
None
2
WARNING
2
OFF
2
1 (d)
3
57483
3
None
3
WARNING
3
OFF
3
1 (e)
2
57485
2
None
2
WARNING
2
OFF
2
15 (f) Any Port Audit Update
(#36); Audit and
Update (#36)
18 (g) 0 busyout trunk
<grp/mbr>
WARNING OFF release trunk
<grp/mbr>
130 (h)
2
None
2
WARNING
4
ON
4
test trunk
<grp>/<mbr>
4
257 (i) 57473 None WARNING OFF
257 (j) 57474 None WARNING OFF
257 (k) 57475 None WARNING OFF
513
4
Any
4
EPF M and E Lead
(#74)
4
MAJ/MIN/
WRN
1,4
OFF
4
test port PCSSpp sh r
3
4
769
4
57481
4
EPF M and E Lead
(#74)
4
MAJ/MIN/
WRN
1,4
ON
4
test port PCSSpp sh r
3
4
1025 (l) Any
2
57392
5
None MAJ/MIN/
WRN
1,2
MINOR
5
OFF
Continued on next page