User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-1217S-SYN-PT (Speech Synthesis Port)

Speech Synthesis DTMF Receiver Inquiry Test

(#164)

This test determines the sanity of the port’s DTMF receiver. The on-board

microprocessor tests the port’s DTMF receiver and determines if it is in a sane

(test passes) or insane (test fails) condition.

2000 ABORT Response to the test request was not received within the

allowable time period.

2100 ABORT Could not allocate the necessary system resources to

run this test.

1. Retry the command at one-minute intervals a

maximum of five times.

2. If the test continues to abort, escalate the problem.

Any FAIL DTMF tones were not detected. This type of failure may

cause features using touch-tone input to the Speech

Synthesis Port to malfunction.

1. Verify that the Tone-Clock circuit pack is functioning

correctly by checking the Error Log and using the

test tone-clock long command.

2. If the test fails again, replace the Speech Synthesis

circuit pack.

PASS The port has detected all DTMF tones correctly.

User-reported troubles should be investigated using

other tests and verifying other ports on this circuit pack

are working correctly.

Table 10-376. TEST #163 Speech Synthesis DTMF Receiver — Continued

Error

Code

Test

Result Description/ Recommendation

Continued on next page