User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1172PR-MEM (TN790 RISC Memory)
10
Table 10-355. TEST #332 Memory Functional Test
Error
Code
Test
Result Description/ Recommendation
100 ABORT The test did not complete within the allowable time period.
1. Retry the command.
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 3 times.
1029
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
ABORT Refer to STBY-SPE Maintenance documentation for a description of these
error codes.
1 - 7 FAIL The Standby SPE Processor circuit pack is defective.
1. Repeat the command at 1-minute intervals a maximum of five times.
2. If the test still shows a failure, replace the Processor circuit pack.
PASS The Standby SPE Processor circuit pack is healthy.
Continued on next page