User Guide
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1142PR-MAINT (Maintenance Processor [TN790 RISC Systems])
10
MTP Outpulse Relay Test (#102)
This test is a nondestructive test.When the internal modem is administered, the
test validates the correct operation of the remote access CO trunk used by
INADS. The MTP first goes off-hook, then on-hook on this trunk. If the loop current
is detected, the test passes. If the external modem is administered the MTP
sends an AT command sequence that will cause the external modem to go
OFF-HOOK and wait for dial-tone. If the modem detects dial-tone, the test
passes. This test is not allowed if the remote access line is in use.
1197 FAIL The Maintenance Processor was reset, but it responded with a NOT PASS
status, indicating that it did not pass initialization correctly. The MTP is not
functioning correctly. The system continues to function. Environmental
monitoring is lost, as is communication with the Standby Processor.
1. Retry at 1-minute intervals a maximum of 5 times.
2. If test continues to fail, replace the Processor circuit pack.
PASS The Maintenance Processor was reset, and it passed initialization correctly.
The other MTP tests should be examined to verify that the MTP is functioning
correctly.
1. Enter test processor a/b and verify that the MTP is functioning correctly.
Table 10-337. TEST #102 MTP Outpulse Relay Test
Error
Code Test Result Description/ Recommendation
100 ABORT The test did not complete within the allowable time period.
1. Retry the command.
1018 ABORT The test has been disabled via administration.
1. To enable the test, issue the change system-parameters
maintenance command, and set the test remote access port field to
‘‘y.’’ (If you have an INADS line, set the field to ‘‘y.’’
2. Rerun the test.
1030 ABORT This test is not run on the Standby SPE.
Continued on next page
Table 10-336. TEST #101 MTP Reset Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page