User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-928MODEM-PT (Modem Pool Port)

Table 10-263. TEST #99 Modem Pool Audit Test

Error

Code

Test

Result Description/ Recommendation

NONE ABORT The system was not able to allocate all the necessary

resources to execute this test. An ABORT simply

indicates that the conversion resource was in use when

the audit was performed. No repair action is necessary

unless it was known that the conversion resource was

actually idle during the test (yellow in-use LED was off)

or was busied out before the test was run. If this is the

case, a TN758 failure condition may exist and the

following procedure should be used:

1. Busyout both of the TN758 Pooled Modem

conversion resources on the circuit pack containing

the failing conversion resource.

2. If the test continues to abort, replace the Pooled

Modem circuit pack and retest.

3. If the circuit pack fails after replacement, escalate

the problem.

Continued on next page